<optgroup id="ez0yu"><b id="ez0yu"></b></optgroup>

  1. <label id="ez0yu"><legend id="ez0yu"></legend></label>
  2. <optgroup id="ez0yu"><sup id="ez0yu"></sup></optgroup>

    <optgroup id="ez0yu"><input id="ez0yu"><li id="ez0yu"></li></input></optgroup>
          <label id="ez0yu"><tr id="ez0yu"></tr></label>
        1. <label id="ez0yu"></label>

              Battery Care and Maintenance - W&W Manufacturing Company

              Battery Care and Maintenance

              How can I maximize the performance of my battery?

              The Do’s and Don’ts of Battery Use

              My new battery isn't charging. Is it defective?

              How can I maximize the performance of my battery?

              There are several steps you can take to help you get maximum performance from your battery:

              • Prevent the Memory Effect - Keep the battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries which do not suffer from the memory effect.
              • Keep the Batteries Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.
              • Exercise the Battery - Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery procedure described above.
              • Battery Storage - If you don't plan on using the battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-Ion batteries will self-discharge during storage; remember to recharge the batteries before use.
              • Sealed Lead Acid - (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months.

              The Do’s and Don’ts of Battery Use

              Battery Do's:

              • Fully charge/discharge battery up to 4 cycles before achieving full capacity of a new battery
              • Fully discharge and then fully charge the battery every two to three weeks for battery conditions.
              • Run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual.
              • Remove from the device and stored in a cool, dry, clean place if the battery will not be in use for a month or longer.
              • Recharge the battery after a storage period
              • Ensure maximum performance of the battery by optimizing the device's power management features. Refer to the manual for further instructions.

              Battery Don'ts:

              • Do not short-circuit. A short-circuit may cause severe damage to the battery.
              • Do not drop, hit or otherwise abuse the battery as this may result in the exposure of the cell contents, which are corrosive.
              • Do not expose the battery to moisture or rain.
              • Keep battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.

              My new battery isn't charging. Is it defective?

              Usually NO. New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge the new battery two to four times to allow it to reach its maximum rated capacity

              It is generally recommend an overnight charge (approximately twelve hours). It is normal for a battery to become warm to the touch during charging and discharging.

              When charging the battery for the first time, the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal with rechargeable batteries. New batteries are hard for the device to charge; they have never been fully charged and not “broken in.” Sometimes the device's charger will stop charging a new battery before it is fully charged. If this happens, remove the battery from the device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge. Don't worry; it's perfectly normal.

               

              W & W Manufacturing Company is a leading USA manufacturer of
              replacement batteries, battery chargers, and battery analyzers for
              Two-Way radios, Bar Code Scanners, Camcorders, Cellular Phones, and Laptop Computers.

              斗牛牛app